How to Root and Install TWRP on Redmi Note 3 [Unlock Bootloader] !!
FIRST OF ALL!!!
Download Root Files for Redmi Note 3
Modified Boot Image For all ROM (China/Global)→DOWNLOAD | File: GlobalStable7.1.8.img
OFFICIAL TWRP for kenzo → | DOWNLOAD File: twrp-3.0.2-1-kenzo.img 33.6M
Flash SuperSU for root access → DOWNLOAD | File: UPDATE-SuperSU-v2.46.zip
Redmi Note 3 toolkit →
How to Unlock Bootloader → Link
How to Root and Install TWRP on Redmi Note 3
2. Unlocked Bootloader is required in some cases, most commonly for TWRP installation. It’s recommended that you unlock the bootloader first
3. Enable USB Debugging on your device. To do so, go to Settings>About Phone> Tap on the Build Number several times until you get a new Developer Options in theSettings. Open Developer Options and enable USB Debugging from there. Trust the connection by allowing it when you connect it to your PC for the first time.
4. Now go to Settings>Developer Options and Enable OEM Unlock.
5. Make sure you have latest device drivers setup on your PC for a better connection. Get it from the official page of your device manufacturer.
5. For ADB and Fastboot download the quick ADB and Fastboot Installer from here for Windows or you may also like Universal ADB drivers.
Installation Instructions:
Step 2: Make sure that you setup ADB and Fastboot on your PC(Files in the Prerequisites). Trust the connection by checking “Always allow from this computer” when you plug in the Android device to your PC for the first time.
Step 3: Now keep the device plugged in and open a command prompt or terminal on your PC. You can simply click the address/location bar in Windows and type “cmd”. Alternatively, hold the shift key on the keyboard and right-click on an empty space and select “Open command window here” option to launch a cmd window.
Step 4: Boot your Android device into the bootloader or Fastboot mode. To do so, issue the following command through cmd or terminal. You can also manually boot into it using the hard key combination like Power+Volume Down while the device is turned off. Meanwhile, use code:
adb reboot bootloader
Step 5: Now issue the following command in the command prompt to check your device connectivity
fastboot devices
Step 6: Now issue the following command to get the bootloader unlock status on your device.
fastboot oem unlock-info
Note: Check the bootloader status. If it’s locked, then unlock it first. (This will reset your device and you will lose all data and apps.)
Step 7: Now reboot your device once and boot back into the Bootloader (Step 4) in order to flash the modified boot image. Rename the boot fie to boot.img first or enter the correct file name in the command below.
fastboot flash boot boot.img
Step 8: Navigate to the location where you have placed the TWRP image file. Rename the recovery file to a simple one, like recovery.img. While the folder with recovery.img file is open, launch command prompt or terminal.
Step 9: Now flash the recovery image. Issue the following command for that.
fastboot flash recovery recovery.img
fastboot flash recovery recovery.img
Step 10: Wait until the recovery gets installed.
Once the installation completes, you can now enjoy your new firmware. Alternatively, while, on Mac OS, you can issue “./fastboot flash recovery recovery.img” command or on Linux type “sudo fastboot flash recovery recovery.img” to flash the TWRP. Same goes for modified boot image.
You can boot into
the TWRP recovery by issuing the following command:
adb reboot recovery
Once the installation completes, you can now enjoy your new firmware. Alternatively, while, on Mac OS, you can issue “./fastboot flash recovery recovery.img” command or on Linux type “sudo fastboot flash recovery recovery.img” to flash the TWRP. Same goes for modified boot image.
How to Root Xiaomi Redmi Note 3
Once you install TWRP, it’s time to root. Place the supersu package and your device’s internal storage or SdCard. Boot your device into the custom recovery and tap install. Now select the supersu file and swipe the confirmation action below. Once done. reboot to system.You can boot into
the TWRP recovery by issuing the following command:
adb reboot recovery
HOPE IT WORKS FOR YOU
FOR ANY ISSUE MAIL ME:)
SHARING IS CARING!!!
0 Komentar Untuk "How to Root and Install TWRP on Redmi Note 3 [Unlock Bootloader] !!"
Posting Komentar